Wilson Trailer Company: Safety Recalls in 2006

Updated on March 19, 2026.

There were 3 safety recalls made by Wilson Trailer Company in 2006. See the details of the recalls below.

You can also see similar information for other manufacturers.

Data Source: NHTSA.

See this for other years:

September 7, 2006

(Campaign #: 123D)

KING PIN SUPPORT BEAM ALUMINUM ANGLE

ON CERTAIN GRAIN TRAILERS, A FATIGUE FAILURE (CRACKING) OF THE ALUMINUM ANGLE BEHIND THE KING PIN SUPPORT BEAM CAN OCCUR CAUSING DISTORTION OF THE BOTTOM RAIL AND COMPROMISING THE KING PIN ASSEMBLY.

NHTSA ID: 06V336000

Component: STRUCTURE

# of Units Affected: 284

Consequence Summary:

IF THE ANGLE FAILS BY WAY OF CRACKING OR DEFORMATION, THE BOTTOM RAIL OF THE TRAILER, WHICH SUPPORTS THE BEAM, COULD BE AFFECTED AND COMPROMISE THE STRENGTH OF THE KING PIN ASSEMBLY, INCREASING THE RISK OF A CRASH.

Corrective Action:

DEALERS WILL INSPECT THE AREA OF CONCERN, MAKE NECESSARY REPAIRS, AND INSTALL A SUPPORT PLATE TO STRENGTHEN THE ANGLE. THE RECALL BEGAN ON OCTOBER 5, 2006. OWNERS MAY CONTACT WILSON AT 1-800-798-2002.

Park Outside Advisory: No

Do not Drive Advisory: No

View Full Recall Details

July 12, 2006

(Campaign #: NR (Not Reported))

CRACKED BEAM CASTING/HOLLAND

ON CERTAIN TRAILERS EQUIPPED WITH HOLLAND SUSPENSIONS, THE SUSPENSION BEAM CASTING MAY HAVE A CRACK AT THE INBOARD, UPPER FLANGE NEAR THE SHOCK MOUNT.

NHTSA ID: 06V246000

Component:

# of Units Affected: 54

Consequence Summary:

AS THE BEAM CRACK GROWS, THE SUSPENSION MAY LOSE ALIGNMENT. THE DRIVER WILL EXPERIENCE DIFFICULTIES IN DRIVING INCREASING THE RISK OF A CRASH.

Corrective Action:

HOLLAND IS CONDUCTING THIS RECALL (PLEASE SEE 06E059000) AND WILL INSPECT THE TRAILERS BY USING A DRY MAGNETIC PARTICLE METHOD. UNITS WITH CRACKS WILL BE REPLACED WITH A NEW BEAM AXLE ASSEMBLY FREE OF CHARGE. OWNERS MAY CONTACT HOLLAND AT 1-616-396-6501 OR WILSON TRAILER COMPANY AT 1-712-252-6477.

Park Outside Advisory: No

Do not Drive Advisory: No

View Full Recall Details

January 31, 2006

(Campaign #: NR (Not Reported))

SUSPENSION HANGER WELDMENT

ON CERTAIN TRAILERS, THE AIR RIDE SUSPENSION HANGER WELD MAY FAIL AT THE ATTACHMENT POINT BETWEEN THE HANGER AND THE SUBFRAME.

NHTSA ID: 06V024000

Component:

# of Units Affected: 2,177

Consequence Summary:

THE SUSPENSION AND AXLES CAN DETACH FROM THE TRAILER FRAME AND CAUSE PERSONAL INJURY TO PERSONS OUTSIDE THE VEHICLE AND COULD CAUSE A CRASH WITHOUT WARNING.

Corrective Action:

DEALERS WILL INSPECT THE SUSPENSION HANGER AREA , REPAIR AS NECESSARY, AND INSTALL A SUPPORT GUSSET TO STRENGTHEN THE WELD FREE OF CHARGE. THE RECALL IS BEGAN ON JANUARY 31, 2006. OWNERS MAY CONTACT WILSON TRAILER AT 1-800-798-2002.

Park Outside Advisory: No

Do not Drive Advisory: No

View Full Recall Details