Terex South Dakota, Inc.: Safety Recalls in 2011

Updated on March 19, 2026.

There were 3 safety recalls made by Terex South Dakota, Inc. in 2011. See the details of the recalls below.

You can also see similar information for other manufacturers.

Data Source: NHTSA.

See this for other years:

November 9, 2011

(Campaign #: SN598)

CRACKS IN THE PLATE WELDS OF THE LOWER BOOM PIVOT

TEREX IS RECALLING CERTAIN MODEL YEAR 1997 THROUGH 2009 XT55 AERIAL DEVICES MOUNTED ON TRUCKS. THESE VEHICLES ARE USED TO ELEVATE PERSONNEL TO TRIM TREES AND FOR UTILITY WORK WHILE PARKED IN THE WORK AREA. CRACKS CAN DEVELOP AROUND THE LOWER BOOM HINGE PIN BOSS AT THE TURNTABLE WHICH CAN PROGRESS INTO FAILURE OF THE PLATES IF NOT DETECTED.

NHTSA ID: 11V542000

Component:

# of Units Affected: 5,123

Consequence Summary:

FAILURE OF THE PLATES WILL CAUSE UNEXPECTED MOTION OF THE BOOM AND COULD CAUSE THE PLATFORM TO FALL, RESULTING IN SERIOUS INJURY OR DEATH TO A PERSON STANDING ON THE PLATFORM.

Corrective Action:

TEREX WILL NOTIFY OWNERS AND WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 7, 2011. OWNERS MAY CONTACT TEREX UTILITIES WARRANTY DEPARTMENT AT 1-605-884-3892.

Park Outside Advisory: No

Do not Drive Advisory: No

View Full Recall Details

August 8, 2011

(Campaign #: SN579)

LOWER BOOM LIFT CYLINDER ROD

TEREX IS RECALLING CERTAIN MODEL YEAR 2000 AND 2001 HR37M AND HR40M UTILITY TRUCKS MANUFACTURED FROM NOVEMBER 2000 THROUGH DECEMBER 2001. THE AERIAL DEVICES INSTALLED ON THESE TRUCKS MAY CONTAIN A LOWER BOOM LIFT CYLINDER WITH DEFECTIVE COMPONENTS. THE MATERIAL USED TO PRODUCE THE CYLINDER ROD ENDS WAS NOT TO SPECIFICATIONS.

NHTSA ID: 11V418000

Component:

# of Units Affected: 109

Consequence Summary:

THE CYLINDER ROD ENDS MAY CRACK CAUSING THE CYLINDER TO DISCONNECT WHILE IN USE. PERSONAL INJURY OR DEATH CAN OCCUR TO THE USER OR TO PERSONS AROUND THE VEHICLE.

Corrective Action:

TEREX WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE CYLINDER ROD ENDS FOR CRACKS. DEALERS WILL ALSO TEST THE CYLINDER MATERIAL FOR HARDNESS. THE SAFETY RECALL BEGAN ON AUGUST 30, 2011. OWNERS MAY CONTACT TEREX UTILITIES WARRANTY DEPARTMENT BY CALLING 1-605-884-3892 OR EMAIL TO UTILITIES.WARRANTY@TEREX.COM.

Park Outside Advisory: No

Do not Drive Advisory: No

View Full Recall Details

May 20, 2011

(Campaign #: SN595)

CABLE PLACING AERIAL DEVICES/LOWER CONTROL LEVER

TEREX IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 TCP40 UTILITY TRUCKS MANUFACTURED FROM JANUARY 2009 THROUGH NOVEMBER 2010. A LOWER CONTROL LEVER MAY HAVE A DEFECT THAT ALLOWS UNINTENDED MOVEMENT OF THE BOOM OR BUCKET.

NHTSA ID: 11V301000

Component:

# of Units Affected: 65

Consequence Summary:

UNINTENDED MOVEMENT OF THE BOOM OR BUCKET COULD RESULT IN INJURIES TO THE OPERATOR OR OTHERS.

Corrective Action:

TEREX WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 30, 2011. OWNERS MAY CONTACT TEREX UTILITIES WARRANTY DEPARTMENT BY CALLING 1-605-884-3892 OR EMAIL TO UTILITIES.WARRANTY@TEREX.COM.

Park Outside Advisory: No

Do not Drive Advisory: No

View Full Recall Details