BMW of North America, LLC: Safety Recalls in 2016
Updated on March 31, 2026.
There were 17 safety recalls made by BMW of North America, LLC in 2016. See the details of the recalls below.
You can also see similar information for other manufacturers.
Data Source: NHTSA.
December 30, 2016
(Campaign #: NR (Not Reported))
Motorcycle Rear Suspension Bolt may Loosen
BMW North America, LLC (BMW) is recalling certain model year 2016-2017 S 1000 RR motorcycles manufactured June 8, 2016, to November 16, 2016, and 2017 S 1000 R motorcycles manufactured on October 12, 2016. One of the bolts on the rear suspension deflection lever may loosen and adversely affect the handling of the motorcycle.
NHTSA ID: 16V948000
Component: SUSPENSION
# of Units Affected: 21
Consequence Summary:
If the bolt loosens and affects the motorcycle's handling, there may be an increased risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will replace the bolts and tighten them to the proper specifications, free of charge. The recall began February 17, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 100
December 21, 2016
(Campaign #: NR (Not Reported))
Loose Ground Cable may cause Shift to Neutral
BMW of North America, LLC (BMW) is recalling certain model year 2016 X5 xDrive40e vehicles manufactured July 29, 2015, to September 9, 2015. The affected vehicles have a Digital Motor Electronic (DME) control unit that may have a loose electrical ground cable, possibly causing an under-voltage condition which would result in the transmission shifting to neutral.
NHTSA ID: 16V919000
Component: ELECTRICAL SYSTEM
# of Units Affected: 8
Consequence Summary:
If the vehicle unexpectedly shifts to neutral, there would be an increased risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will tighten the ground cable, free of charge. The recall began February 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 100
December 20, 2016
(Campaign #: NR (Not Reported))
Seat Mounted Air Bags may not Deploy
BMW of North America, LLC (BMW) is recalling certain model year 2017 BMW 640i, 640i xDrive, 650i, 650i xDrive, M6, 535i, 535i xDrive, 430i, 430i xDrive, 440i, 440i xDrive, M4, X1 sDrive28i, X1 xDrive28i, i3, i8, Rolls-Royce Dawn, Mini Clubman Cooper, Clubman Cooper S, Cooper All4, Cooper S All4, Mini 4-Door Cooper, Cooper S, Mini 2-Door Cooper, Cooper S, John Cooper Works and 2016 BMW 528i, 528i xDrive, 535i, 535i xDrive, 550i, 550i xDrive, M5 and 535d vehicles. The affected vehicles have seat- mounted side air bag inflator initiators that may fail to ignite during a crash.
NHTSA ID: 16V914000
Component:
# of Units Affected: 3,506
Consequence Summary:
If the air bag inflator initiator fails to ignite, the seat-mounted air bag will not deploy, increasing the risk of injury.
Corrective Action:
BMW will notify owners, and dealers will replace the air bag modules, free of charge. The recall began February 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 88.46
November 17, 2016
(Campaign #: NR (Not Reported))
Supplemental Restraints may not Deploy as Needed
BMW of North America, LLC (BMW) is recalling certain model year 2011 BMW 528i, 528xi, 535i, 535xi, 550i and 550xi vehicles manufactured March 1, 2010, through August 31, 2011. The affected vehicles may have received a replacement Sensor Cluster Unit (SCU) during a service visit. These SCUs have an acceleration sensor that may have been incorrectly programmed and, as a result, the SCU may not accurately determine if activation and deployment of the air bags, safety belt pre-tensioners and head restraints is necessary in the event of a crash.
NHTSA ID: 16V832000
Component: AIR BAGS
# of Units Affected: 91
Consequence Summary:
Depending on the severity of the crash, inadequate activation of the driver and/or passenger air bags, safety belt pre-tensioners and active head restraints may increase the risk of injury.
Corrective Action:
BMW will notify owners, and dealers will replace the SCU, free of charge. The recall began on December 16, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 98.28
October 17, 2016
(Campaign #: NR (Not Reported))
Loose Fuel Pump Wiring may cause Stall/Fuel Leak
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i xDrive, 550i and 550i xDrive and 2012 535i ActiveHybrid, 640i Convertible, 650i Convertible, 650i xDrive Convertible, 650i Coupe and 650i Coupe xDrive vehicles. The affected vehicles have in-tank fuel pumps that may have insufficiently crimped wire contacts.
NHTSA ID: 16V746000
Component: FUEL SYSTEM, GASOLINE
# of Units Affected: 136,188
Consequence Summary:
The loose wires may cause the connector to melt, resulting in a fuel leak. Additionally, the fuel pump may stop working, possibly causing an engine stall and increase the risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 52.73
October 17, 2016
(Campaign #: NR (Not Reported))
Seat Belt may Not Lock/FMVSS 209
BMW of North America, LLC (BMW) is recalling certain model year 2016-2017 X1 sDrive28i, X1 xDrive28i, MINI Hardtop 4 Door Cooper, Mini Hardtop 4 Door Cooper S, MINI Cooper Clubman, and Cooper S Clubman, 2017 Rolls-Royce Ghost, and 2016 528i vehicles. The vehicle-sensitive locking mechanism of the seat belt Emergency Locking Retractor (ELR) for the driver's seat may not lock as designed. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."
NHTSA ID: 16V747000
Component: SEAT BELTS
# of Units Affected: 15,455
Consequence Summary:
In the event of a crash where heavy braking is applied, the Emergency Locking Retractor (ELR) may activate when the occupant is more forward in the seat, possibly increasing the risk of injury.
Corrective Action:
BMW will notify owners, and dealers will replace the driver's seat belt assembly, free of charge. The recall began July 3, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 89.71
October 3, 2016
(Campaign #: NR (Not Reported))
Electronic Power Steering Control Unit Not Welded
BMW of North America, LLC (BMW) is recalling one model year 2017 BMW X3 xDrive 28i vehicle manufactured on June 7, 2016. This vehicle has electronic power steering (EPS), and the contact pins on the EPS control unit may not have been welded properly resulting in increased resistance.
NHTSA ID: 16V704000
Component: STEERING
# of Units Affected: 103
Consequence Summary:
An increase in pin contact resistance can increase the risk of a fire, even while the vehicle is parked and ignition is off.
Corrective Action:
The vehicle was repaired at the dealership before sale. Therefore, an owner notification notice will not be issued for this campaign. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 82.35
September 26, 2016
(Campaign #: NR (Not Reported))
Engine Stalling Due to ECU Software
BMW of North America, LLC (BMW) is recalling certain model year 2013-2016 BMW G650GS motorcycles manufactured March 8, 2013, to October 12, 2015, and 2013-2015 BMW G650GS Sertao motorcycles manufactured March 8, 2013, to May 23, 2014. The affected motorcycles may stall during operation due to an engine control unit (ECU) software issue.
NHTSA ID: 16V689000
Component: ELECTRICAL SYSTEM
# of Units Affected: 1,398
Consequence Summary:
If the engine stalls during operation, it increases the risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will update the ECU software, free of charge. The recall is expected to begin November 18, 2016. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall supersedes recall 15V-537. Motorcycles that were repaired under that recall need to have their software updated again as part of this campaign.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 47.57
September 21, 2016
(Campaign #: NR (Not Reported))
Incorrectly Welded Driver Air Bag Inflator
BMW of North America, LLC. (BMW) is recalling certain model year 2015 BMW X3 sDrive28i, X3 xDrive28i, X3 xDrive35i, X3 xDrive28d, X4 xDrive28i and X4 xDrive35i vehicles, and model year 2014-2015 X5 xDrive35i, X5 sDrive35i, X5 xDrive50i, and 2014 X5 xDrive35d vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been improperly welded.
NHTSA ID: 16V683000
Component: AIR BAGS
# of Units Affected: 3,606
Consequence Summary:
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
Corrective Action:
BMW will notify owners, and dealers will replace the driver's front air bag, free of charge. The recall began on November 1, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 78.52
September 9, 2016
(Campaign #: NR (Not Reported))
Rear Sub-Frame Bolts may Loosen
BMW North America, LLC (BMW) is recalling certain model year 2016 BMW M2 Coupe vehicles, 2015-2017 M3 Sedan vehicles and 2015-2016 M4 Coupe and M4 Convertible vehicles. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.
NHTSA ID: 16V653000
Component: STRUCTURE
# of Units Affected: 196
Consequence Summary:
Loose rear sub-frame bolts may adversely affect vehicle handling and control, increasing the risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will replace the rear sub-frame bolts with new bolts, free of charge. The recall began on November 3, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 97.94
July 25, 2016
(Campaign #: NR (Not Reported))
Side Air Bag may Deploy Improperly/FMVSS 226
BMW of North America, LLC (BMW) is recalling certain model year 2016-2017 MINI Clubman vehicles manufactured August 19, 2015, through July 14, 2016. The side curtain air bags for the front seat occupants may deploy in the intended positions in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 226, "Ejection Mitigation."
NHTSA ID: 16V553000
Component: AIR BAGS
# of Units Affected: 7,810
Consequence Summary:
If a side curtain air bag does not inflate as intended in the event of a crash, there is an increased risk of injury to the front seat occupants.
Corrective Action:
BMW will notify owners, and dealers will modify the driver and passenger side curtain air bag covers, free of charge. The recall is expected to begin September 12, 2016. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 97.99
July 19, 2016
(Campaign #: NR (Not Reported))
Inadequately Welded Driveshaft may Fracture
BMW of North America, LLC (BMW) is recalling certain model year 2015 BMW M5 sedans manufactured September 4, 2014, through December 4, 2014, 2015 M6 coupes manufactured September 3, 2014, through December 3, 2014, 2015 M6 convertibles manufactured September 8, 2014, through December 4, 2014, and 2015 M6 Gran Coupe vehicles manufactured September3, 2014, through December 4, 2014. The affected vehicles have a driveshaft that may have been inadequately welded during manufacturing.
NHTSA ID: 16V540000
Component: POWER TRAIN
# of Units Affected: 956
Consequence Summary:
Due to the improper weld, the driveshaft may fracture and fail, causing loss of drive to the rear wheels and a loss of propulsion. Additionally, if the car is turned off and exited without the parking brake applied, the car may roll. Either condition increases the risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will inspect and replace the driveshaft, as necessary, free of charge. The recall is expected to begin during September 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 92.65
May 25, 2016
(Campaign #: )
Passenger Frontal Air Bag Inflator May Rupture
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, 2009-2011 X5 xDrive35d vehicles, 2008-2011 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, and 2010-2011 X6 ActiveHybrid vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, BMW is recalling certain model year 2007-2008 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, and 2008 BMW X6 xDrive35i, X6 xDrive50i and X6 M vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to high absolute humidity and temperature cycling.
NHTSA ID: 16V364000
Component: AIR BAGS
# of Units Affected: 97,738
Consequence Summary:
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Corrective Action:
Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger frontal air bag inflator or air bag module, free of charge. The recall began July 28, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: Yes
Completion Rate (%): 49.87
May 23, 2016
(Campaign #: NR (Not Reported))
Possible Damage to Lower Child Seat Anchor Bars
BMW of North America, LLC (BMW) is recalling certain model year 2011-2017, X3 sDrive28i, X3 xDrive28i and X3 xDrive35i, vehicles manufactured July 2, 2010 to April 14, 2016, 2015-2017 X3 xDrive28d vehicles manufactured March 10, 2014 to March 31, 2016, and 2015-2017 x4 xDrive28i, X4 xDrive35i and X4 xDriveM40i vehicles manufactured March3, 2014 to April 15, 2016. The affected vehicles have lower anchor bars for securing child restraint seats that may become damaged when using the European-ISOFIX-type, rigid-style connector, child restraint system.
NHTSA ID: 16V333000
Component: CHILD SEAT
# of Units Affected: 188,668
Consequence Summary:
Damaged lower anchor bars may increase the child's risk of injury in the event of a crash.
Corrective Action:
BMW will notify owners, and dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body, free of charge. The recall began on July 13, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 61.69
May 17, 2016
(Campaign #: NR (Not Reported))
Front Driveshaft Universal Joint may Fail
BMW of North America, LLC (BMW) is recalling certain model year 2011 X5 xDrive 35i, xDrive50i, X5 M, X6 xDrive35i, X6 xDrive50i, and X6 M vehicles manufactured April 5, 2010, to November 20, 2010, 2011 X5 xDrive35d diesel vehicles manufactured April 7, 2010, to November 20, 2010, and 2011 X6 Active Hybrid vehicles manufactured April 15, 2010, to November 17, 2010. The affected vehicles have a front driveshaft universal joint that may not seal out water and debris from getting in and damaging the joint, which could lead to its failure.
NHTSA ID: 16V311000
Component: POWER TRAIN
# of Units Affected: 21,493
Consequence Summary:
If the front universal joint fails, the front wheels would not be driven, affecting vehicle traction. Additionally, continued driving of the vehicle with a broken front universal joint may damage other components. Either condition may increase the risk of a crash.
Corrective Action:
BMW will notify owners, and dealers will replace the front driveshaft, free of charge. The recall began on July 8, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 76.23
March 25, 2016
(Campaign #: NR (Not Reported))
Air Bags may not Deploy due to Residue on Module
BMW of North America, LLC (BMW) is recalling certain model year 2016 740Li, 750Li, and 750Lxi vehicles manufactured July 1, 2015, to December 11, 2015. The affected vehicles have an air bag control module that may randomly reset due to an electrical short circuit as a result of residual metallic particles from the manufacturing process.
NHTSA ID: 16V173000
Component: AIR BAGS
# of Units Affected: 6,110
Consequence Summary:
In the event of a crash while the air bag module is resetting, the air bags may not deploy, increasing the risk of occupant injury.
Corrective Action:
BMW will notify owners, and dealers will replace the air bag control module, free of charge. The recall began on July 11, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 96.7
February 5, 2016
(Campaign #: NR (Not Reported))
Driver's Frontal Air Bag Inflator May Rupture
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i xDrive, 335is and M3 Coupes and Convertibles, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i SAVs, 2007-2010 X3 xDrive30i SAVs, 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M SAVs, 2009-2013 BMW X5 xDrive35d SAVs, 2008-2014 X6 xDrive35i, X6 xDrive50i, and X6 M SACs, 2010-2011 BMW X6 xDrive50i SACs and 2008-2011 M3 Sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
NHTSA ID: 16V071000
Component: AIR BAGS
# of Units Affected: 840,000
Consequence Summary:
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Corrective Action:
BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
Park Outside Advisory: No
Do not Drive Advisory: No
Completion Rate (%): 49.28